How to Fix a Hole in an Air Mattress With Super Glue

How To Fix a Hole in An Air Mattress with Super glue

As an Amazon Associate, we may receive a commission for purchases made through links in the post at no additional cost to you.

Air mattresses are great for camping. They save space in the car and are easily transportable. However, they’re not impervious to damage. Have you or someone you know ever had a hole in the air mattress and wanted to fix it? Was it easy to repair?

You can use many things to fix the problem, but the least surprising is super glue. Superglue is a fixer of so many things, from paper to plastic. The only problem is that few people know how to fix a hole in an air mattress with super glue.

If you don’t, sit tight as we explain everything in exceptional detail.

Using Super Glue to Fix a Hole in an Air Mattress 

Superglue has a tremendous capacity to bond things together, and why should that be any different for airbeds?

Here’s how.

What You Will Need

  • An inflater for your airbed
  • Tailors’ Marker Pen
  • Soap and water
  • Superglue
  • Thin Plastic/Rubber Material
  • A Pair of Scissors

Step 1: Know Where the Leak Is

You can’t fix a problem you can’t see. That’s why your first step is to locate the source of the problem. Holes in an air bed are easy to detect. That’s because you’ll most likely hear some hissing sound from the leak when you inflate the air bed.

Therefore, slowly inflate the air bed to locate the leak. Then listen carefully for the hissing sound that will be unmistakable as the air you inflate into the air bed escapes through the hole (s).

Another way you can find the leak is by mixing water and soap and then pouring it on the airbed. Once you do that, you will see bubbles or foam at the point of the hole. 

Step 2: Mark the Leak 

X marks the spot. Use your tailor’s marker pen to mark the area with the leak. This is a crucial step since you might have difficulties finding the holes once you go to the next step.

A simple circle around the area will be perfect. Do the same for all the leaks you locate.

Step 3: Now Fix It!

For this step, you can proceed in two ways, depending on the size of the holes. If you have small holes, spray them with the superglue and wait for the curing. That should fix it.

For large holes, you will need to get a patch. Here’s where the plastic or rubber material comes in. Use scissors to cut pieces out of rubber or plastic. Cut a size you’re sure will cover the large hole.

Apply some superglue around the leak area and on the patch, then cover the hole. Repeat this step for all the other spots, and you will have fixed the leakages in your air mattress.

Step 4: Test if It Worked

You can’t know if the procedure worked without testing the air bed. To do that, take your inflator and inflate the air bed, and wait to hear of any leaks. Repeat the step to determine air leaks.

If there are still some leaks, repeat the procedure until you hear no hissing from the leaks.

Superglue comes in handy if you’re in a camping situation, and more elaborate methods have too many requirements to help you.

And that’s how to fix an air mattress with super glue.

What Other Methods Can You Use to Fix Holes in Air Mattress?

You can use plenty of other methods to fix holes in an air mattress quickly. Let’s look at some of them.

1. Using Duct Tape

Duct tape is another cure-all for holes in an air mattress. It isn’t very complicated to use this method. All you have to do is detect the area of the leak and then cover it with duct tape.

Inflate the mattress, listen for leaks, mark the areas with the leaks, and deflate it. Now cut enough duct tape to cover the area with a leak. The larger the holes, the more duct tape you will need to cut.

After covering each leak with duct tape now inflate the airbed and test to see if the duct tape worked. If it didn’t, repeat the steps above.

The only issue with duct tape is that it is only a quick fix. That means you will need t look for a more permanent solution since the duct tape will probably wear out with time.

However, this temporary fix might last you a few weeks or get you out of a crisis while camping.

2. Using Nail Polish

You didn’t think nail polish could help fix holes in an air mattress, did you? It turns out that it can. It, however, is another one of those temporary fixes that will only hold you in good stead until you can get a permanent solution.

You will follow the same basic steps to locate the nail polish leak. However, once you discover the leak, you need to scrub it with a file or sandpaper. After that, apply the nail polish to the area and leave it to dry.

After that, inflate the air mattress and check for any leaks. This will only be a stopgap solution, and you will need to repair the air bed with more permanent methods, such as using super glue.

3. Using the Patch Kit

It is like the makers of air mattresses knew they were prone to damage. What could explain the repair kits they come with? The patch kit comes in handy whenever you have holes in the mattress.

The only issue with using the patch kit is that most people never remember to carry it when they go camping!

What Other Glue Works Perfect for Holes on Air Mattresses?

Gorilla glue is the other type of glue you can consider when repairing your air mattress. It has an incredible setting time and will sort the problem as fast as super glue. You can use it to add the patches or even with the patch kit that came with the air mattress.

Like super glue, gorilla glue works great because it dries relatively quickly and grips the fabric of the air mattress, keeping it in the air.

Important Points to Remember

  • You can use hot gun glue, but you’ll need to be careful not to cause further damage to the air mattress. The hot air glue gun works perfectly for tears along the seams of the mattress and minute holes.
  • You can also use patches out of your clothes to cover the holes in your air mattress. Remember not to use your favorite shirt, though!

FAQs About How to Fix a Hole in an Air Mattress With Super Glue

Will super glue seal a hole?

Super glue is a strong adhesive. It will seal the hole but will not provide structural integrity. For some types of holes, super glue might be able to seal them up. It would depend on the hole size.

How do you fix an air mattress without a patch kit?

The air mattress will not inflate properly because of a hole in the fabric. The hole can be fixed by stretching a piece of tape over the opening to patch it. First, find a piece of tape that is larger than the opening and stick it to the hole. The tape needs to be sticky side down. The tape will act like glue and seal the hole in the fabric.

Will Gorilla Tape work on air mattresses?

In order to answer this, one would need to know the thickness of the air mattress. If the air mattress is thicker than 1/8 inch, Gorilla Tape should work as a temporary fix.

How do I stop a hole from getting bigger on my air mattress?

A hole in an air mattress may occur due to improper inflation, overuse of the air mattress, or puncture by sharp objects. The hole is caused by a tear in the fabric and will need to be repaired to stop it from getting bigger.  First locate the tear, if the hole is on one side of the mattress you will need to seal that edge. If the holes are on opposite sides then you will need to seal the two sides that meet in the middle.

How do I stop the air from leaking out of a hole?

The type of sealant that is to be used in order to stop the air from leaking out of a hole is to be determined by the type of material that is present in the space which has been punctured. That being said, it is imperative for one to ascertain whether the surface(s) are made of hard plastic, metal, or stone before determining what sealant should be used. If plastics are present, then ideally the hole should be sealed with polyurethane foam.

Final Thoughts

We hope you now understand how to fix a hole in an air mattress with super glue. Super Glue will seal the hole and make the air mattress airtight again. 

The repair may last for a couple of nights, depending on how large the hole was and how quickly you patched the leak, but it should buy an adventurous camper some extra time to find another place to sleep!

As an Amazon Associate, we may receive a commission for purchases made through links in the post at no additional cost to you.

Relevant Resources:

  1. Why is Super Glue Age Restricted? Know the Reason Behind This
  2. Does Super Glue Work on Rubber
  3. Is Super Glue Conductive
  4. Can You Super Glue Wires Together – Best Guides Ever
  5. Is Super glue Waterproof
  6. Can You Use Super Glue for Fake Nails
  7. How Long Does Super Glue Take to Dry
  8. Is Superglue Flammable
  9. What Temperature Does Super Glue Melt

Leave a Comment

Your email address will not be published. Required fields are marked *